Dualshock 3 driver windows 10 download.ScpToolkit

Looking for:

- How to Use PS3 Controller on PC (NO MotioninJoy) - Driver Easy 

Click here to DOWNLOAD

     

- How to use a PS3 controller on PC guide | PC Gamer

 

Jump to a Section. This article explains how to connect and use a PS3's DualShock 3 controller with a PC, with or without a Bluetooth dongle, so you can play games on Steam without a mouse and keyboard. When you've assembled everything you need, here's what to do:. If your DualShock 3 controller is paired with a PS3, first unplug the PS3 from its power source, or else it can cause syncing conflicts. If your computer doesn't have built-in Bluetooth support, plug in your wireless Bluetooth dongle.

Download and run ScpToolkit Setup. It should automatically download all of the other files it needs, so just follow all the prompts. If you're on Windows 7, download and install the Xbox controller drivers. After the ScpToolkit finishes setting up, select the big green button above Run Driver Installer on the window that pops up.

On the next screen, make sure the boxes next to Install DualShock 3 driver and Install Bluetooth driver are checked if you have a Bluetooth dongle plugged in. Select the arrow beside Choose DualShock 3 controllers to install and choose your PlayStation 3 controller from the drop-down menu. If connecting a Bluetooth dongle, select the arrow beside Choose Bluetooth dongles to install and choose your Bluetooth device from the drop-down menu.

Select Install. When finished, select Exit. The ScpToolkit Settings Manager will then appear in your system tray. Select it to add another device.

Once installed properly, the DualShock 3 should automatically work with the Steam client and any PC game that supports gamepads. You may be able to adjust the control settings for individual games, but your computer will recognize the PS3 controller as an Xbox controller, so keep that in mind when adjusting the button mapping.

When you're done playing, turn off the DualShock by holding down the PS button on the center of the controller. To use your PS3 controller wirelessly, you'll either need a PC with built-in Bluetooth compatibility or a Bluetooth dongle plugged in.

You must plug in the controller before you can play wirelessly. After unplugging the controller, it should automatically sync with your PC via Bluetooth if the proper drivers are installed. But setting up wireless connectivity requires some extra steps. If you have the latest version of macOS, you can skip steps below, as the process has become more streamlined.

Reset your PS3 controller by inserting a paperclip into the tiny hole under the L2 button on the back of the DualShock 3. Connect the controller to your Mac with a USB cable. Note: Steam actually has native support for the DualShock 3, meaning you can simply plug the controller in and set it up through the Big Picture mode Controller settings menu. However, Steam does not support the DualShock 3's gyro controls or more importantly!

Follow this guide to get the PS3 controller working on PC with those buttons working, too. Download the software linked above, and start by installing the four Microsoft packages. If you're on a Windows 7 PC, you'll also need to install the Xbox controller driver. On Windows 8 and 10, it's already built in! Now we can start making it work.

Bluetooth installation note: if you also want to be able to use the controller wirelessly, make sure you have a Bluetooth dongle plugged in or your motherboard's Bluetooth enabled. ScpToolkit notes you need a Bluetooth 2. Download ScpToolkit and run the installer. After accepting the terms and choosing your install location, you'll get a menu of all the options to install, as in the screenshot above.

I recommend leaving this to the default. Click Install to begin the installation. After about 30 seconds, ScpToolkit will be installed, and you'll see this screen, with a big green button that says Run Driver Installer. Since this is a fresh install, that's what we want to do. Click the button. This screen may look intimidating, but it's still pretty simple! Check the boxes for the drivers you want to install. In this case, we want to make sure Install Dualshock 3 driver is checked it should be by default.

Now click the arrow next to "Choose Dualshock 3 controllers to install" to see a dropdown list of USB devices attached to your computer. Find the PlayStation 3 controller in the list and check it. Bluetooth installation note: Make sure the "Install Bluetooth driver" box is checked.

Like you did with the Dualshock 3, click the arrow next to "Choose Bluetooth dongles to install" and find your Bluetooth device in the list. Check it. Click Install.

Watch the SCP Toolkit run through its installation process. You'll see lots of pop-ups on the side of your screen as it detects your hardware. Scroll to the bottom of the log and you should hopefully see "Dualshock 3 USB Driver installed" and "Bluetooth Driver installed" if you chose to , signifying a successful installation. If all went well, click Exit. Now that it's installed, you'll see ScpToolkit as an icon in your system tray. Here you can change some settings like disabling rumble, adjusting analog stick deadzones, and more.